Add Automatically Detected Devices To A Mac Acl - NETGEAR Orbi Pro WiFi 6 User Manual

Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
You can now add and manage devices on the MAC ACL. For more information, see the
following sections:
• Add automatically detected devices to a MAC ACL on page 54
• Manually add, remove, or change the information for a device on a MAC ACL on
page 55

Add automatically detected devices to a MAC ACL

After you set up a MAC ACL for a network and specify the default policy for the MAC
ACL, the router automatically detects devices that are connected or were connected to
the network for which you set up the MAC ACL.
You can select one or multiple devices from the detected list and add them to the MAC
ACL.
To add automatically detected devices to a MAC ACL:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 28.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > MAC ACL.
The MAC ACL page displays.
5. Go to the section for the network for which you want to manage the MAC ACL.
6. Click the ADD DEVICE button.
The Manual Access Management pop-up window opens.
7. Select the check boxes for the devices that you want to add to the MAC ACL.
8. Click the ADD button.
Control Access to the Internet 54 User Manual