Ducati 748R Owner's Manual page 117

Turn indicators (fig. 37)
Remove the screw (1) and detach the glass (2) from the
body.
The bulb is of the bayonet-type: press and rotate anti-
clockwise to remove; fit the spare bulb by pressing and
turning clockwise until it clicks.
Refit the glass sliding the small tab (A) into the suitable
slot in the indicator body and tighten the screw (1).
2
Stop light (fig. 38)
To replace the stop and parking light bulbs, lift the tail and
unscrew the two screws (1) that secure the glass (2).
The bulb is of the bayonet-type: press and rotate anti-
clockwise to remove. Fit the spare bulb by pressing and
turning clockwise until it clicks. Refit the glass (2).
A
1
fig. 37
2
1
fig. 38
E
49