Grundig VISION 4 Manual page 10

10
OVERVIEW
SCAN
PAT
S
P
DR, DVD
AUX
----------------------------------------------------------------------------------------------
Enlarges the picture.
Selects the Split Screen function.
Selects the sub-pages in teletext mode.
Updates a page in teletext mode.
Switches to operation of a GRUNDIG digital
receiver, GRUNDIG digital receiver with hard
disk (PDR), GRUNDIG DVD player or GRUNDIG
DVD recorder.
Keep the appropriate button (»DR«, »DVD«)
pressed down. Then press the appropriate button.
Note:
The »DR« button has been programmed for
operating a GRUNDIG digital receiver (remote
control level 1).
The »DVD« button has been programmed for
operating a GRUNDIG DVD player.
You can change this programming, see »AUX«
button.
The functions available depend on the model of
the device you are using.
Just try it out.
Programming the remote control for the operation
of external devices.
Press »AUX« and hold it down and press three
numerical buttons to enter the appropriate code:
»1«, »2«, »3« for a GRUNDIG DVD player.
»4«, »5«, »6« for a GRUNDIG DVD recorder.
»1«, »4«, »7« for a GRUNDIG digital receiver
(remote control level 1).
»2«, »5«, »8« for a GRUNDIG digital receiver
(remote control level 2).
»3«, »6«, »9« for a GRUNDIG digital receiver
with hard disk (PDR).