Philips E Series User Manual page 9

2. Setting up the monitor
Description of the On Screen Display
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in
all Philips LCD monitors. It allows an end
user to adjust screen performance or
select functions of the monitors directly
through an on-screen instruction
window. A user friendly on screen
display interface is shown as below:

 
 

 





Basic and simple instruction on the
control keys
To access the OSD menu on this Philips
Display simply use the single toggle
button on the backside of the Display
bezel. The single button operates like
a joystick. To move the cursor, simply
toggle the button in four directions.
Press the button to select desired
option.
The OSD Menu
Below is an overall view of the structure
of the On-Screen Display. You can use
this as a reference when you want to
work your way around the different
adjustments later on.

7
Main menu Sub menu
On, O
MPRT
Game Setting
0~20
MPRT Level
O , Fast , Faster, Fastest
SmartResponse
On, O
SmartFrame
Size (0,1,2,3,4,5,6,7)
Brightness (0~100)
Contrast(0~100)
H. position
V. position
1,2,3,4
On
LowBlue
O
Mode
1 HDMI 1.4
Input
2 HDMI 1.4
DisplayPort
USB C
Auto On, O
FPS,Racing,RTS,Gamer1,Gamer2,LowBlue Mode,EasyRead,O
SmartImage
Picture
Brightness
0~100
Contrast
0~100
Sharpness 0~100
SmartContrast On, O
1.8, 2.0, 2.2, 2.4, 2.6
Gamma
Pixel Orbiting On, O
Over Scan On, O
O , PIP, PBP
PIP / PBP Mode
PIP/PBP
PIP / PBP Input 1 HDMI 1.4,2 HDMI 1.4, DisplayPort, USB C(343E2E)
Small, Middle, Large
PIP Size
PIP Position
Top-Right, Top-Left, Bottom-Right, Bottom-Left
Swap
SmartSize Panel Size
1:1
Aspect
Audio Volume 0~100
Mute On, O
Audio Source HDMI1, HDMI2, DisplayPort, USB C(343E2E)
Color Temperature
Color Native,5000K,6500K,7500K,8200K,9300K,11500K
sRGB
Red: 0~100
User De ne
Green: 0~100
Blue: 0~100
English, Deutsch, Español, Ελληνική, Français, Italiano, Maryar, Nederlands,
Language
Português, Português do Brasil, Polski , Русский, Svenska, Suomi, Türkçe,
Čeština, Українська, 简体中文, 繁體中文,日本語,한국어
OSD Setting Horizontal 0~100
Vertical
0~100
Transparency
O , 1, 2, 3, 4
OSD Time Out 5, 10, 20, 30, 60
USB Settings USB Standby Mode
Resolution Noti cation
Setup
Reset
Information
Note
• MPRT: To reduce motion blur, LED
backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change.
• 75Hz refresh rate or higher is
required for MPRT.
• FreeSync and MPRT cannot be
enabled simultaneously.
• MPRT is to adjust brightness for
blur reduction, so cannot adjust
brightness while MPRT is turned on.
• MPRT is gaming-optimized mode.
It is recommended to turn off
17'' (5:4) 19'' (5:4) 19''W (16:10) 22''W (16:10) 18.5''W (16:9)
19.5''W (16:9) 20''W (16:9) 21.5''W (16:9) 23''W (16:9) 24''W (16:9)
27'W (16:9) 34'W
On, O
On, O
Yes, No