True TSCI Series Installation Manual page 17

Electronic Temperature Control (cont.)
Display Probe Temperatures
The display shows the temperature probe readings in different
locations of the cabinet.
1. Press info
to show t1.
2. Press and hold info to show the current t1 probe
temperature.
3. Release info to show t2.
4. Press and hold info to show the current t2 probe
temperature.
TEC_TM_098 REV. A
S C I E N T I F I C S E R I E S
L A E C O N T R O L L E G E N D
5. Release info
6. Press and hold info to show the current t3 probe
7. Release all buttons and wait for the control to display the
10/12/2020
Compressor Running
Evaporator Fan Running
Cabinet in Defrost
Activation of 2 nd Parameter Set
Alarm
to show t3.
temperature.
NOTE: If the T3 probe is not activated, t3 will not appear.
current cabinet temperature.
truemfg.com
Info/Set Point Manual Activation/
Up Arrow
Manual Defrost/ Stand-By/
Down Arrow Cancel
Page 17 of 32