Night Cover - True TOAM-48GS-HC~TSL01 Installation Manual

Cabinet Setup (cont.)
Night Cover Operation
NOTE: It is recommended that the night cover be used
during overnight or extended off-peak business times to
conserve energy.
1. Locate the night cover handle on the inner front product floor.
See fig. 1.
2. Pull the night cover toward the top of the product opening.
See fig. 2.
3. Secure the night cover in place by placing the handle on the
hook at the top of the product opening. See fig. 3.
4. To lower the night cover, lift the handle off the hook and
gently guide the night cover down, keeping tension on the
night cover and allowing it to retract into the product floor.
– Do not release the night cover handle from your
WARNING
hand until the cover is completely retracted.
Fig. 2. Pull the handle toward the top of the product
opening.
Page 12 of 20
TOAM | OPEN AIR MERCHANDISER
09/25/2020
Fig. 1. Locate the night cover handle.
Fig. 3. Secure the cover in place.
truemfg.com
TEC_TM_012 REV. B