Control Panel - AEG 9000 Series User Manual

18 www.aeg.com
The appliance works
exploiting its full potential
with salt. Salt refilling when
required by the appliance
maintains the softening
system efficient. If you use
the appliance without salt for
a long time, once the salt is
finally refilled, the water
softener function is
completely restored after a
few long washing cycles.
8.4 Water softener
regeneration
After a few cycles, the appliance may
need to regenerate the water softener.
The regeneration process is
automatically ensured when running
programmes such as Cottons and
Synthetics routinely, even if the

9. CONTROL PANEL

9.1 Control panel description
Programme dial
1
Display
2
Delay start touch button (Delay Start)
3
Time saving touch button (Time
4
Save)
1
Eco 40-60
programme duration is reduced by taping
the Time Save button once.
The regeneration process is
automatically ensured when running
programmes such as Cottons and
Synthetics routinely.
Other programmes may perform the
regeneration process automatically,
when settings and conditions allow it.
If you usually run very short
cycles, the regeneration
process may not occur: you
could see that salt has not
been used, since it is
consumed during
regeneration phase only.
To ensure the regeneration
process run a Cottons or a
Synthetics programme
once a week or every two
weeks at least.
13 12 11 10 9
Skipping phase touch button
5
(Options)
• Wash phase skipping (Rinse only)
• Wash and rinse phase skipping
(Spin only)
• Only drain (Drain only)
2 3
8 7 6
4
5