Table of Contents
Advertisement
The panel sets are delicate and should be handled with care.
The baffle and panel support bracket (Figure 22) retains the side panels, supports the front end of the ceramic
glass baffle, and has a shield which directs the light from the ceiling of the firebox (available on i40s models
only) down onto the log set (model dependent). It is held in place by two bolts. The bracket and its bolts
should be removed before installing the rear and side panels so that the bolts protruding from the ceiling do
not damage the panels.
Figure 22: Baffle and panel bracket.
Baf e support tabs
Side panel support tabs
Figure 23: Baffle and panel bracket supporting
side panels.
Installation
1. With the above mentioned support bracket and bolts removed, hang the rear panel onto the posts
protruding from the rear wall (Figure 24 and Figure 25).
i40 TOFINO
Panel Installation
Figure 24: Rear wall showing panel support posts.
16
Rear panel support posts /
support posts for rear end
of ceramic glass baf e
051119-48 100000300
Advertisement
Table of Contents
