Input Source - MSI ARTYMIS Series Quick Start Manual

1st Level Menu
Sharpness
Color
Temperature
Screen Size

Input Source

1st Level Menu
HDMI1
HDMI2
DP
Type-C
Auto Scan
2nd/3rd Level Menu
0-5
Cool
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Auto
4:3
16:9
21:9
1:1
2nd Level Menu Description
∙ Users can adjust Input Source in any mode.
OFF ∙ Users can use the Navi Key to select Input
ON
Description
∙ Users can adjust Sharpness in
any mode.
∙ Sharpness improves clarity and
details of images.
∙ Color Temperature default is
Normal.
∙ Use Up or Down Button to select
and preview mode effects.
∙ Press the OK Button to confirm
and apply your mode type.
∙ Users can adjust Color
Temperature in Customization
mode.
∙ Users can adjust Screen Size in
any mode, any resolution and any
screen refresh rate.
∙ Default is Auto.
∙ If 1:1 is selected then PIP or PBP
is enabled, Screen Size have to
set to Auto.
∙ If MPRT is enabled then 1:1 is
selectred, MPRT will be turned
OFF.
∙ If 1:1 is selected, Adaptive Sync
will be set to OFF.
Source at below status:
• While "Auto Scan" is set to "OFF" with the
monitor at power saving mode;
• While "No Signal" message box is shown
on the monitor.
15
OSD Menus