Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the
Safety
Instructions.
To connect your monitor to the computer:
1. Turn off your computer.
2. Connect the DisplayPort or HDMI cable, and the USB cable from your monitor to
the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: S2721DGFA default setting is DisplayPort 1.4. A DisplayPort 1.1
Graphic card may not display normally. Please refer to
problems – No image when using DP connection to the
default setting.
Connecting the HDMI cable
HDMI
"product specific
PC" to change
HDMI
Setting up the monitor
|
31