Stihl MS 290 Instruction Manual page 24

English
left: Filler cap - without markings
right: Filler cap - with markings on
cap and fuel tank
Filler cap without marking
To open:
Open bracket until it is vertical
N
Turn the filler cap counterclockwise
N
(approx. 1/4 turn)
22
Remove the filler cap
N
Filling with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends using the STIHL
filling system for fuel (special
accessory).
Fill with fuel
N
Closing
Bracket is in an upright position:
Position filler cap – position
N
markings on the filler cap and the
filler port must be aligned with each
other.
Push the filler cap down as far as it
N
will go
Hold the filler cap down and turn it
N
clockwise until it engages
Fold down the bracket as far as it
N
will go
Checking the lock
The lug on the bracket must engage
–
entirely in the recess (arrow)
MS 290, MS 310, MS 390