Omron K8DT-PZ Series Manual

New Product
Three-phase Voltage, Asymmetry, and Phase-sequence Phase-loss Relay
K8DT-PZ
Protect motors and other equipment from unstable
voltages in the power supply system.
Detect overvoltages, undervoltages, voltage
asymmetry, phase sequence, and phase loss for
three-phase power supplies.
• Phase loss detection while the motor is operating.
• Global power supply support. (Changed with a switch.)
• Greater resistance to inverter noise.
• Width of 17.5 mm to reduce space required in panels.
• Push-In Plus Terminal Blocks that reduce wiring work.
The use of cage clamps enables wiring with bare stranded wires.
Double-insertion holes for crossover wiring (all terminals).
• UL listed for easy shipping to North America.
• Certification is pending for LR standards.
• Models added with transistor outputs for superior contact reliability.
Refer to Safety Precautions on page 9.
Refer to pages 7 to 8 for commonly asked questions.
Ordering Information
Three-phase Voltage, Asymmetry, and Phase-sequence Phase-loss Relay
Rated input voltage *
3-phase 3-wire mode 200, 220, 230, 240 VAC
3-phase 3-wire mode 380, 400, 415, 480 VAC
Note: The input range is set with a rotary switch.
* The power supply voltage is the same as the rated input voltage.
Options (Order Separately)
Front Cover
Appearance Model
Y92A-D1A
For the most recent information on models
that have been certified for safety
standards, refer to your OMRON website.
Output
Relay: SPDT contact output
Transistor: NPN output
Relay: SPDT contact output
Transistor: NPN output
Model
K8DT-PZ1CN
K8DT-PZ1TN
K8DT-PZ2CN
K8DT-PZ2TN
1