Bissell CleanView Connect Manual page 8

Storing Your Robot
Store your robotic vacuum cleaner safely indoors where it is unlikely to be damaged.
Status and Error Notifications
Status Notifications
Status Button Light State
Power ON Pulse Once > Blink > On Pulse Once
Cleaning Blink > Fade In > On
Charging Breathing
Pairing Mode Blink
Paired On
Low Battery Blinking White
Error Notifications
Error
Robot is Trapped, Lifted, or
Cliff Sensors are Dirty
Front Caster Wheel Sensor is Blocked
Left or Right Wheel is Stuck
Edge Cleaning Brushes are Stuck
Brush Roll is Stuck
Bumper is Stuck or Robot is Trapped
8
Light Ring
Pulse Once > Fade In > 30 seconds > Fade Out Activation Sound
Pulse Once > Breathing for 30 seconds > Off
Off
Solid for 5 Seconds > Fade Out
Off
Button Light State
Flashing Red
Flashing Red
Flashing Red > Solid Red 1 Beep
Flashing Red > Solid Red 2 Beeps Turn OFF the robot and remove hair and debris
Flashing Red > Solid Red 3 Beeps Turn OFF the robot and remove hair and debris
Flashing White
©2020 BISSELL Inc. All rights reserved.
Part Number 1625231 07/20
Sound
Activation Sound
1 Beep
1 Beep
3 Beeps
2 Beeps
Sound Remedies
1 Beep Place robot on floor away from objects and
resume cleaning. If error persists, use a dry cloth
to clean the 3 cliff sensors on the bottom of the
robot.
3 Beeps Remove Front Caster Wheel assembly, clear
debris from assembly housing, reinstall wheel.
Turn robot OFF and remove hair and debris from
wheels.
from Edge Cleaning Brushes.
from Brush Roll.
2 Beeps Turn OFF the robot and tap the Bumper several
times to release any debris that may have
accumulated.