Vizio Elevate P514a-H6 User Manual page 21

Function LED Behavior
The LED indicator
Input Search
color will change
Input Srch
per specific input.
Waiting to learn:
Program Remote
Flash from bottom
Learn
Prg Remote
Power LED
PwrLED
AV Delay
LED at the bottom
indicates no delay.
AV Delay
Reset Audio or
All LEDs will flash
Reset All
3 times when
settings are reset.
Reset All
SETUP > Input Search > OK to initiate an automatic input detection sequence. This is the
same as a long key press of the INPUT button on the remote. Specific inputs will show a
different LED color:
• AUX In: Green
• AUX VA: Violet
• Digital Optical: Red
SETUP > PrgRemote > Use the Next/Previous buttons and OK button to toggle and
select and program your TV remote to control the Volume Down, Volume Up, and Mute
functions on your sound bar. See the Programing the Sound Bar on page 25 section for
to top and back
more information.
continuously.
Power LED On
SETUP > PwrLED > Use the Next/Previous buttons to enable/disable the Power LED.
Voice notifications will also be enabled/disabled.
Power LED Off
SETUP > AV Delay > Use the Next/Previous buttons to increase/decrease the amount of
audio delay. The LED indicators will move to the top with increasing audio delay level.
SETUP > Reset Audio or Reset All > Use the Next/Previous buttons to reset either Audio
or All settings. Press the OK button to select.
Audio - Only audio settings, such as bass and treble levels, will be reset.
All - All paired Bluetooth devices will be unpaired and all settings will be lost. All
programmed IR remotes will also be removed. See the Factory Reset on page 24 for
more information.
Mode & Level Settings
Description
• HDMI 1: Yellow
• HDMI 2: Aqua
• HDMI (eARC): Magenta
ENG - 21