Table of Contents
Advertisement
Maintenance and diagnostics
9
Kernel update
11 Maintenance and diagnostics
11.1
64
Building Technologies
CPS Fire Safety
Kernel update
The NK8237 Kernel is the main component of the operating system, which acts as
a bridge between the application and the hardware level.
In certain conditions, it may be necessary to update the Kernel, following specific
instructions of the technical support. In such cases, you can use the
NK8000Kernel_Update Setup.msi tool that is available in the NK8000 - Support
Tools folder of the DMS8000 DVD.
The tool is provided as a Microsoft Installer file (MSI) and can be easily installed on
the Windows system that can connected to the NK8237 unit on the IP network.
Starting the Kernel Update utility
Once installed, the NK8000Kernel_Update application can be started from the
Windows Start menu. The following window appears:
NK8000 Kernel Update window
Getting information about the new Kernel
Click the About button to show the Kernel version and the additional feature set
(typically displayed as a market package). For example:
Linux x.y... #nnn ddd mmm yyyy hh:mm:ss CET – MP4.81 yyymmdd
After updating, the same set of Kernel information will display when units are
monitored by the NW8204 tool [➙ 65].
Updating the Kernel
To update the Kernel:
1. Enter the IP address of the NK8237 to update.
2. Set the FTP Mode to Active (default) or Passive (needed if a firewall is active in
the PC).
3. Click Update Kernel.
At that point, the tool performs a number of preliminary checks. Namely:
It verifies whether the NK8237 firmware is compatible with the new Kernel. If
⚫
not, a message will instruct you to download a new firmware and try updating
the Kernel again.
It verifies whether the existing Kernel is older, the same, or newer then the new
⚫
Kernel and prompts you to confirm the update.
It verifies whether there is enough free memory space to install the new Kernel.
⚫
If not, the NK8237 configuration will be temporarily removed to free memory
space. You will be prompted to choose whether to restore the configuration at
the end of the Kernel upgrade (not restoring the configuration can be useful to
save time if you are upgrading the system and you are going to download a
new configuration from Composer).
A6V10854379_a_en
25.01.2019
Advertisement
Table of Contents
