4.16 Thermal relay calibration
4.16.1 Electronic thermal relay
To reset, in the case of an intervention of the thermal relay,
press the button "RESET" (Fig. 26).
There are two different solution to test the electronic thermal relay:
Device test (Fig. 22)
Push slowly the button in the window with a little screwdriver.
Contact test NC (95-96) and NO (97-98)(Fig. 28)
Insert in the window a little screwdriver and move it in the
sense of the arrow.
20106891
Installation
S8109
Fig. 26
S8111
S8111
Fig. 27
S8110
Fig. 28
34
GB