Table of Contents
Advertisement
Operating Instructions and Parts Manual
General Safety
19. Never turn on the grinder with the
grinding wheel or any rotating
Information
(Cont'd.)
parts touching the workpiece.
20. Use only grinding wheels in
3. Do not wear loose fitting clothing,
compliance with ANSI standard B7.1
scarves, or neckties in work area.
and rated greater than 6,000 RPM.
Loose clothing may become caught
in moving parts and result in serious
21. Do not use the grinder if the disc
personal injury.
flange or clamp nut is missing or if
4. Do not wear jewelry when
the spindle is bent.
operating any tool. Jewelry may
WORK AREA
become caught in moving parts and
result in serious personal injury.
WARNING
!
5. Always use attachments designed
a power tool in an explosive
for use with this tool. Do not use
atmosphere, such as in the
damaged or worn attachments.
presence of flammable liquids, gases, or
6. Never trigger the tool when not
dust. Power tools create sparks which
applied to a work object.
may ignite the fumes or dust.
Attachments must be securely
attached. Loose attachments can
CAUTION
!
cause serious injury.
lighted. Cluttered benches and dark
7. Never point a tool at oneself or any
areas invite accidents.
other person. Serious injury could
occur.
CAUTION
!
8. Use steady, even pressure when
visitors away while operating a power
using tool. Do not force. Too much
pressure can cause blade to break
tool. Distractions can cause you to lose
or overheat.
control.
9. Keep all nuts, bolts and screws tight
ELECTRICAL SAFETY
and ensure equipment is in safe
working condition.
WARNING
!
10. Do not put hands near or under
or wet conditions. Water entering a
moving parts.
power tool will increase the risk of
11. Always use proper guard with
electric shock.
grinding wheel. The guard protects
operator from broken wheel
WARNING
!
fragments.
surfaces such as pipes, radiators,
12. Accessories must be rated for at
ranges, and refrigerators. There is an
least the speed recommended on
increased risk of electric shock if your
the tool warning label. Wheels and
body is grounded.
other accessories running over rated
speed can fly apart and cause injury.
WARNING
!
13. Grinding wheel and guard must be
•
Never carry tool by its cord.
securely attached as described in
•
Never pull the cord to disconnect
this operating manual before
from receptacle. Pull plug at the
connecting the grinder to a power
outlet.
source.
1. Do not operate tool with damaged
14. Grinding wheels must be stored in a
cord or plug.
dry place.
• Have a damaged or worn power
15. Before attaching the grinding
cord and/or strain relief replaced
wheel, inspect it for visible defects.
immediately.
If cracked, chipped, or warped, do
• Do not attempt to repair power
not install it.
cord.
16. Do not over tighten the clamp nut
2. Make sure cord is located so that it
on the grinding wheel. Excessive
will not be stepped on, tripped
tightening can cause the wheel to
over, or otherwise subjected to
crack during operation.
damage or stress.
17. Make sure that the guard is in good
3. Do not use an extension cord unless
condition and securely installed
absolutely necessary. Use of
before operating grinder.
improper extension cord could
result in a risk of fire and electric
18. Do not clamp the grinder in a vise
shock. If an extension cord must be
or use as a fixed grinder.
www.chpower.com
used, make sure:
• That the pins on plug of extension
cord are the same number, size and
shape as those of plug on tool cord.
• That the extension cord is
properly wired and in good
electrical condition.
• If an extension cord is to be used
outdoors it must be marked with
the suffix "W-A" or "W" following
the cord type designation to
indicate it is acceptable for outdoor
Do not
use. For example – SJTW-A
operate
4. Do not expose cord to rain, snow or
frost.
PERSONAL SAFETY
Do not misuse this
WARNING
!
product. Excessive
Keep work area
exposure to vibration, work in
clean and well
awkward positions, and repetitive
work motions can cause injury to
hands and arms. Stop using any tool if
Keep bystanders,
discomfort, numbness, tingling, or pain
children, and
occur, and consult a physician.
1. Stay alert, watch what you are
doing, and use common sense when
operating a power tool. Do not use
tool while tired or under the
influence of drugs, alcohol, or
Do not expose
medication. A moment of
power tools to rain
inattention while operating power
tools may result in serious personal
injury.
Avoid accidental
CAUTION
!
Avoid body contact
starting. Be sure
with grounded
switch is in the locked or off position
before plugging in the tool. Carrying
tools with your finger on the switch or
plugging in a tool with the switch on
invites accidents.
2. Remove adjusting keys or wrenches
Do not abuse cord.
before turning on the tool. A key or
wrench attached to a rotating part
of the tool may result in personal
injury.
3. Do not overreach. Keep
proper footing and
balance at all times.
Proper footing and
balance enable better control of the
tool in unexpected situations.
4. Always work in a well-ventilated
area. Wear an OSHA-approved dust
mask and safety glasses.
5. Hold tool by insulated gripping
surface when performing an
operation where the tool may
contact hidden wiring. Contacting a
"live" wire will make exposed metal
parts of the tool "live" and shock
the operator.
2
Funcionamiento
Si la herramienta no funciona
correctamente, devuelva la
(Continuación)
herramienta a una instalación
de servicios para repararla.
1. Deje que la herramienta alcance la
Cambio de escobillas de carbón
máxima velocidad antes hacer que
Retire y verifique las escobillas de
la herramienta toque la superficie
carbón regularmente. Cámbielas
de trabajo.
cuando se desgasten hasta la marca
2. Aplique una mínima presión en la
límite. Mantenga las escobillas de
superficie de trabajo, dejando que la
carbón limpias y libres para que se
herramienta trabaje a alta velocidad.
deslicen en los soportes. Ambas
3. Una vez que comienza a cortar,
escobillas de carbón deben cambiarse
mantenga el ángulo de la rueda
al mismo tiempo. Use únicamente
de corte en la superficie de trabajo.
escobillas de carbón idénticas.
Esto evitará que doble la rueda,
Use un destornillador para retirar las
lo cual podría resultar en la rotura
tapas de los soportes de las escobillas.
de la rueda y en lesiones.
Quite las escobillas de carbón
4. Retire la herramienta de la superficie
desgastadas, introduzca las nuevas
de trabajo antes de apagarla.
y asegure las tapas de los soportes
Permita que la herramienta deje
de las escobillas.
de girar antes de apoyarla.
Limpieza
Limpie el polvo y los desechos de
Mantenimiento
los orificios y contactos eléctricos,
soplando con aire comprimido.
El servicio de la herramienta debe ser
Mantenga los mangos de las
realizado sólo por personal de
herramientas limpios, secos y libres
reparaciones calificado. El servicio
de aceite o grasa. Use únicamente un
o mantenimiento realizado por
jabón suave y un paño húmedo para
personas no calificadas puede provocar
limpiar la herramienta, evitando todos
riesgo de lesiones.
los contactos eléctricos.
Después de seis meses a un año,
Ciertos agentes de limpieza y solventes
dependiendo del uso, devuelva la
son nocivos para los plásticos y otras
herramienta a la instalación de servicio
piezas aisladas. Algunos de éstos
de Campbell Hausfeld para:
incluyen gasolina, aguarrás, solvente
• Lubricación
para laca, solvente de pintura,
• Inspección de los cepillos
solventes de limpieza con cloro,
amoníaco y detergentes de uso
• Inspección mecánica y limpieza
doméstico que contengan amoníaco.
• Inspección eléctrica
• Pruebas para asegurar el
funcionamiento adecuado
DG471500CK
Nunca use solventes inflamables
ni combustibles cerca de las
herramientas.
LUBRICACIÓN
Para su seguridad y protección
eléctrica continuas, la lubricación
y el servicio de esta herramienta
deberán ser realizados ÚNICAMENTE
por un CENTRO DE SERVICIO
AUTORIZADO DE CAMPBELL
HAUSFELD.
SERVICIO TÉCNICO
Para obtener información con relación
al funcionamiento o reparación de
este producto, sírvase llamar al
1-800-424-8936.
PRECAUCION
!
El servicio de la herramienta debe
ser realizado sólo por personal de
reparaciones calificado. El servicio
o mantenimiento realizado por
personas no calificadas puede provocar
riesgo de lesiones.
19 Sp
Advertisement
Table of Contents
