Wiring Plan - Siemens SITRANS L Series Operating Instructions Manual

Fixed conductors and flexible conductors with ferrules can be inserted directly into
the terminal openings. In the case of flexible conductors for opening the terminals,
use a screwdriver (3 mm blade width) to push the actuator lever away from the
terminal opening. When released, the terminals are closed again.
Figure 5.1
You can find further information on the max. wire cross-section under " Technical
data - Electromechanical data".
Connecting
Connect the transmitter according to the following wiring plan.
5.3

Wiring plan

Electronics and connection compartment
1
SITRANS LR150
Operating Instructions, 08/2020, A5E50352155
Connection
Voltage supply, signal output
Connecting
5.3 Wiring plan
21