Table of Contents
Advertisement
Installing the palm-rest and keyboard assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the speakers.
2. Install the
system
board.
3. Install the
power-button board with optional fingerprint
4. Install the
heat
sink.
5. Install the
coin-cell
battery.
6. Install the touchpad.
7. Install the
I/O
board.
8. Install the
display
assembly.
9. Install the
power-adapter
10. Install the battery
(3-cell
11. Install the fan.
12. Install the
solid-state drive in M.2 slot
13. Install the
solid-state drive in M.2 slot
14. Install the
WLAN
card.
15. Install the
memory
module.
16. Install the
base
cover.
17. Follow the procedure in
port.
or 4-cell).
two.
one.
After working inside your
reader.
computer.
Removing and installing components
65
Advertisement
Table of Contents
