Husqvarna 570 Workshop Manual page 23

Replacing the generator
1. The following components must be removed before
the generator can be replaced:
A. Starter. See page 18.
B. Flywheel. See page 20.
2. Remove the bolt for the rear damper element (D)
and upper AV spring (B). Remove the bolt on the
front AV element (D). See fig. 12.
3. Dismantle the screw on the heater switch (A). See
fig. 12.
4. Dismantle the throttle cable (A), impulse hose (B),
fuel hose (C), earth cable (D) and (E). See fig. 13.
5. Dismantle the sleeve on the carburettor adjustment,
short-circuit cables (F) and (H). Loosen the cable (I)
on the carburettor heater. See fig. 13.
ELECTRICAL SYSTEM
A
B
C
Fig. 12
C
G
I
Fig. 13
A
D
A
B
D
E
F
H
English – 23