Britax ADVOCATE User Manual page 41

ADVOCATE/BOULEVARD CLICKTIGHT User Guide
4. Pull the end of the belly
pad and buckle retainer
out of the slot in the seat
cover to remove.
5. Turn the buckle retainer
sideways and route the
buckle assembly out of
the belly pad.
Replacing the Harness Buckle
1. Turn the buckle retainer
sideways and route it
through the fabric strip on
the belly pad.
2. Route the belly pad and
buckle retainer through
the buckle slot in the
cover.
– Ensure that the buckle
is through the correct
cover slot for the
desired buckle position.
3. Slide the end of the belly
pad over the seat and
(if applicable) over the
comfort foam.
4. Turn the buckle
retainer sideways
and route it into the
corresponding buckle
slot in the seat.
– Ensure that the
buckle is in the
correct position
and the red release
button faces out.
39