Dell OptiPlex 5480 All-in-One Service Manual page 92

Table 4. System setup options—System Configuration menu(continued)
System Configuration
SMART Reporting
USB Configuration
Enable USB Boot Support
Enable Rear USB Ports
Enable Side USB Ports
Rear USB Configuration
Side USB Configuration
USB PowerShare
Audio
OSD Button Management
Disable OSD button
Touchscreen
Touchscreen
Miscellaneous Devices
Enable Camera
Enable Secure Digital (SD) Card
Secure Digital (SD) Card Boot
Secure Digital (SD) Card Read-Only Mode
92 System setup
By default, all the options are enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology (SMART)
during system startup.
By default, the Enable SMART Reporting option is not enabled.
Enable or disable booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
By default, the Enable USB Boot Support option is enabled.
Enable or disable booting from USB mass storage devices connected to rear USB
port.
By default, the Enable Rear USB Ports option is enabled.
Enable or disable booting from USB mass storage devices connected to side USB
port.
By default, the Enable side USB Ports option is enabled.
Enable or disable rear USB configuration.
By default, all the options are enabled.
Enable or disable rear USB configuration.
By default, all the options are enabled.
Enable or Disable USB PowerShare
By default, the Enable USB PowerShare option is not enabled.
Enable or disable the integrated audio controller.
By default, all the options are enabled.
Enable or disable OSD button.
By default, the Disable OSD Buttons option is not enabled.
Enable or disable touchscreen (only for touchscreen computers).
By default, the Touchscreen option is enabled.
Enable or disable various onboard devices.
Enable or disable the camera.
By default, the Enable Camera option is enabled.
Enable or disable the SD card.
By default, the Enable Secure Digital (SD) Card option is enabled.
Enable or disable the SD card read-only boot.
By default, the Secure Digital (SD) Card Boot option is not enabled.
Enable or disable the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is not enabled.