Table of Contents
Advertisement
3. Replace the two (M2x2) screws that secure the system board to the palm-rest and keyboard assembly.
4. Connect the speaker cable to the system board.
5. Open the latch and connect the touchpad cable to the system board.
6. Open the latch and connect the keyboard-backlight cable to the system board.
7. Open the latch and connect the keyboard cable to the system board.
8. Open the latch and connect the power-button cable to the system board.
Next steps
1. Install the
power-adapter
2. Install the
right
fan.
3. Install the
left
fan.
4. Install the
wireless
card.
5. Install the
memory
modules.
6. Install the battery.
7. Install the
base
cover.
8. Follow the procedure in
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
memory
modules.
5. Remove the
wireless
card.
6. Remove the
left
fan.
7. Remove the
right
fan.
8. Remove the
display
assembly.
9. Remove the
power-adapter
10. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached.
About this task
The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.
48
Removing and installing components
port.
After working inside your
computer.
Before working inside your
port.
computer.
Advertisement
Table of Contents
