Page 1
IMPORTANT: Read all instructions before using. Guide d’utilisation Page 17 IMPORTANT: Lire toutes les instructions avant de démarrer les travaux. Manual de instrucciones Página 29 IMPORTANTE: Lea todas las instrucciones antes de usar. Instruction manual Guide d’utilisation Manual de instrucciones CT 36 E AC...
Contents Sym- Significance Symbols ..........About this manual........ Wear a dust mask. Safety instructions ....... Tip or advice Technical data ........Functional description ......Handling instruction Intended use ........watt Operation ..........hour Settings ..........minutes Working ..........seconds Filter............. kilograms After finishing work ......
Safety instructions IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basis precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS DUST EXTRACTOR: WARNING - To reduce the risk of fire, electric shock, or injury: – Do not leave the dust extractor when plugged in. Unplug from outlet when not in use and before servicing.
Page 6
SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS This appliance must be grounded. If it should mal- This GROUNDING METHODS - SKETCH A function or breakdown, grounding provides a path of pliance is least resistance for electric current to reduce the risk for use on of electric shock.
Technical data Dust extractor CT 36 E AC Power consumption (dust extractor only) 2.9 - 8.3 A (350 - 1000 W) Total connected load max. 12 A (1440 W) Max. rating of connected Power Tool 3.7 A Volume flow (air), turbine max.
Risk of injury from tools starting up unexpectedly In North America, only Festool machines with Before setting the switch to the "AUTO" or the voltage specifications 120 V/60 Hz may be "MAN"...
Settings Consider the pictures on the fold-out page. air pressure. An IAS adapter (454757) is available to connect Festool pneumatic tools to the IAS system. Connecting electric power tools The operating pressure of the tool must be 6 bar for the automatic switch-on unit to function correctly.
Escaping foam and fluids Switch off the machine immediately and empty the dust container. Extracting dry materials Special features of the CT 36 E AC- LHS To use the mobile dust extractor in combination WARNING with the PLANEX: Not suitable to vacuum hazardous or toxic sub- Use kink-resistant suction hose D 36 mm x 3.5...
Filter Removing the filter bag WARNING Open the locking clips [2-2] and remove the top section of the machine [2-1]. Risk of injury During the following procedure, take care not to raise dust more than is unavoidable. Moisten the main filter with a water spray before removing it. Changing the filter bag Inserting the filter bag Open the locking clips [2-2] and remove the top...
Page 12
locking clips [2-2]. ENS-CT 26/36/48 Changing the main filter Removing the disposal bag [8] Open the locking clips [2-2] and remove the top NOTE section of the machine [2-1]. Close the disposal bag. Motor damage Remove the disposal bag. Never operate the extractor without a main filter fitted as the motor may become damaged.
locking clips [2-2]. After finishing work Switch off the mobile dust extractor and discon- nect the plug. Wind up the mains power cable. Empty the dust container. CAUTION Hazardous dust Damage to the respiratory passage Wipe down the mobile dust extractor and clean all accessories thoroughly using the extractor (inside and out) before removing from the working area.
Using accessories and consumable The accessory and tool order number can be found material from other suppliers will most likely affect in the Festool catalog or on the Internet under the quality of your working results and limit any war- www.festoolusa.com.