Control Operation - U-Line 1000 Series Quick Start Manual

QUICK START GUIDE
USER GUIDE

Control Operation

ALL 1200 SERIES EXCEPT FZR
CONTROL FUNCTION GUIDE
FUNCTION
ON/OFF
Leave interior light on
Adjust Temperature
Toggle between º F / º C
Enable Sabbath Mode
Disable Sabbath Mode
Showroom Mode
This unit is Star-K certified. See www.star-k.org for more details.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
will appear in display
•
Close door to silence alert and reset
Control Operation
COMMAND
Press and release
Press and release to leave interior
light on for 3 hours; press again to
deactivate
Press or and release
Hold and for 5 seconds
Press and hold for 5 seconds and
release
Press and release
Hold and for 5 seconds
NOTES
Unit will turn On or OFF
After 3 hours, factory default is restored; light will
turn on when door is open
When the display is flashing, press
adjust the set point temperature. Note: temperature
displayed is the actual temperature inside unit
The display will change units
The o F / o C symbol will flash briefly after 5 seconds.
Interior light and display will go dark and remain so
until user resets mode - unit continues to operate
Display and interior light return to normal operation
Display will show
display will function normally, but the compressor
and fans will not energize.
Repeat command to return to normal operation.
Display will show
11
or
for 2 seconds. Interior light and
SH
for 2 seconds.
EH
u-line.com
u-line.com
to