Enhanced Locate Function; Locating A Point By Specifying The Locate Number - Fostex D-160 Addendum

Enhanced Locate function

The function of storing Locate points has been enhanced. You can store up to 99 Locate points into the LOCATE
key to perform a simple Locate function. Specifying the desired Locate number will locate the corresponding
point immediately.
This section explains how to locate a point by specifying the Locate number. For more information regarding
how to locate ABS 0 (top of a Program), REC END (end of recording), and points stored in the Memory keys, refer
to the main Owner's Manual.

Locating a point by specifying the Locate number

POWER
1.Press the RECALL key while the D-160 is stopped.
The D-160 displays the Locate number selection.
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6
2.Use the JOG dial to select the desired Locate
number.
You can enter any number from 00 to 99.
Locate number 00 always contains the time data of the
last Locate point.
3.Press the LOCATE key.
The corresponding time data appears. You can edit this
time data. The value flashes in seconds.
Blink
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6
Memory Data
16 TRACK DIGITAL RECORDER
RECORD TRACK
1/9 3/11
2/10 4/12
PUNCH
IN / OUT
LOCKED HD ACCESS
Blink
7 8 9 12 13 14 16
10 11 15
SETUP
7 8 9 10 11 12 13 14 15 16
AUTO RTN
CLIPBOARD
AUTO PLAY IN
D-160
COPY MOVE
AUTO
REHEARSAL
PUNCH
TAKE
OPTICAL
ENVELOPE
RECORD STOP
7/15 8/16 SHIFT
5/13 6/14
TC IN CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
If you wish to locate the point with this time data, go to
step 4. If you wish to edit this time data, use the HOLD/>
key or the SHUTTLE dial to move a flashing cursor to the
numbers you wish to edit, then use the JOG dial to modify
the value.
4.Press the LOCATE key.
44.1kHz
The D-160 immediately locates the point that corresponds
to the displayed memory data (time data).
If you have edited the time data, the D-160 locates the
new corresponding point. The time data of the Locate
point is automatically stored in Locate number 00.
If you wish to store the edited data, instead of locating
the point, press the STORE key, not the LOCATE key.
The D-160 displays the Locate number selection.
Enter the desired Locate number and press the STORE key.
The edited time data will be stored in the selected Locate
number.
LOCATE
44.1kHz
17
Addendum for D-160 Version 2.0
3, 4
AUTO PUNCH EXECUTE
OUT START IN OUT END DISP SEL /YES
AUTO RTN TIME BASE SEL
PASTE ERASE UNDO REDO HOLD/ STORE
PGM SEL
LOCATE VARI PITCH
PLAY REWIND F FWD
EXIT
/NO
RECALL
1
PREVIEW
2