Edit And Re-Store Data That Is Already Stored - Fostex D-160 Addendum

Addendum for D-160 Version 2.0
1. Press the HOLD/> key while the D-160 is stopped.
The currently-displayed time value (or bar/beat/clock value)
is captured and the D-160 enters data edit mode.
2. Press the HOLD/> key, or turn the SHUTTLE dial to
move the flashing cursor on the time value digit, and
use the JOG dial to increase or decrease the value.
3. Press the STORE key.

Edit and re-store data that is already stored

RECALL the desired time data already stored in the LOCATE key, edit that data and re-store it.
1. Press the RECALL key while the D-160 is stopped.
The menu to select the LOCATE number will appear.
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6
7
2. Turn the JOG dial to select the desired LOCATE
number, then press the LOCATE key.
The data edit mode will appear when the data stored in
the selected LOCATE number appears.
Blink
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7
3. Press the HOLD/> key, or turn the SHUTTLE dial to
move the (cursor) column of the time indication to edit
(cursor flashing point), increase or decrease the
number setting with the JOG dial or input the desired
time base.
POWER
1/9 2/10 3/11 4/12
PUNCH
IN / OUT
LOCKED
Blink
44.1kHz
8 13
9 10 11 12 14 15 16
SETUP
LOCATE
44.1kHz
8 9 10 11 12 13 14 15 16
4. Select the LOCATE number desired using the JOG
dial.
5. Press the LOCATE key.
The edit time data is stored as the time data for the
selected LOCATE number.
• Press the STORE key instead of the HOLD/> key in
Step 1 and omit Step 3 to speed operation.
AUTO RTN
CLIPBOARD
AUTO PLAY IN OUT
D-160
16 TRACK DIGITAL RECORDER
COPY MOVE
AUTO
REHEARSAL
PUNCH
TAKE
OPTICAL
ENVELOPE
RECORD STOP
RECORD TRACK
5/13 6/14 7/15 8/16 SHIFT
HD ACCESS TC IN CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
4. Press the STORE key (the STORE LED lights up).
The LOCATE number selection menu to store data will
appear.
OL
0
3
6
9
12
18
24
30
42
1
•If the STORE key is press instead of the LOCATE key at
this stage, it becomes possible to directly LOCATE the
time data of the selected LOCATE number. For more
details refer to the next section on "Location Functions."
5. You can use the JOG dial to input the desired
LOCATE number.
6. Press the LOCATE key.
The edit time data is stored as the time data for the
selected LOCATE number.
16
4
2, 6 3
AUTO PUNCH EXECUTE EXIT
START IN OUT END DISP SEL /YES /NO
AUTO RTN TIME BASE SEL
PASTE ERASE UNDO REDO HOLD/ STORE RECALL
PGM SEL PREVIEW
LOCATE VARI PITCH
PLAY REWIND F FWD
3
2 3 4 5 6 7 8 9 10 11 12
1
2, 5
Blink
44.1kHz
13 14 15 16