Replacing The Batteries - Sony ICD-P620 Operating Instructions Manual

Replacing the batteries

The battery indicator in the display
window shows the battery condition.
When flashes, replace the batteries
" "
with new ones.
When flashes, the batteries
" "
are exhausted and the unit will stop
operation.
Battery life* (With continuous use)
In the HQ mode
Recording:
Playback**:
In the SP and LP modes
Recording:
Playback**:
(hr.: hours)
* Using Sony alkaline batteries LR03 (size AAA)
**When playing back through the internal
speaker with the medium volume level
The battery life may shorten depending on the
operation of the unit.
10
GB
Approx. 11 hr.
Approx. 7.5 hr.
Approx. 22 hr.
Approx. 11 hr.

Notes
Do not use manganese batteries for this unit.

When you replace the batteries with new

ones, the clock setting display appears.
In this case, set the date and time again.
The recorded messages and alarm setting,
however, will remain.
When replacing the batteries, be sure to

replace both batteries with new ones.
Do not charge dry batteries.

When you are not going to use the unit for

a long time, remove the batteries to prevent
damage from battery leakage and corrosion.
The unit is accessing data while "ACCESS"

appears in the display window or the
operation indicator flashes in orange. While
accessing, do not remove the batteries.
Doing so may damage the data.