Miele KM 3010 Operating And Installation Instructions page 10

Warning and Safety instructions

Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.

The hob is not intended for use with an external timer switch or a
remote control system.

The connection to the gas supply must be carried out by a suit-
ably qualified gas fitter, e.g. a Gas Safe registered technician in the
UK (see "Gas connection"). If the plug has been removed from the
connection cable or or the connection cable is not supplied with a
plug, the hob must be connected to the electricity supply by a suit-
ably qualified electrician (see "Installation – Electrical connection").

If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified electrician (see
"Electrical connection" in the "Installation" chapter).

During installation, maintenance and repair work, the hob must be
disconnected from the mains electricity supply. The gas supply must
also be shut off. Depending on country this is done in one of several
different ways:
– the mains fuse has been disconnected, or
– the screw-out fuse is removed (in countries where this is applic-
able), or
– switch off at the wall socket and withdraw the plug from the
socket. Pull by the plug and not by the mains connection cable to
disconnect from the mains electricity supply.
– the gas inlet valve is closed.

Danger of electric shock!
Do not use the hob if it is faulty, or if the ceramic surface is cracked,
chipped or damaged in any way. Switch it off immediately. Discon-
nect it from the mains electricity and gas supply. Call Service.
10