Disassembly and Reassembly
No
Parts
12
Cabi Front RH
13
Cabi Top
3-102
Procedure
1) Purge the Coolant first.
2) Unscrew and remove 2 mounting
screws in Service Valve.
(Use +Screw Driver)
3) Separate the pipe from the Entrance/
Exit using a welder.
When removing the compressor,
Heat Exchanger, and Pipe, purge
the Coolant inside the Compressor
completely and remove the pipe with
a welding flame.
1) Unscrew and remove 2 mounting
screws in Service Valve.
(Use +Screw Driver)
2) Separate the pipe from the Entrance/
Exit using a welder.
Remark
Samsung Electronics