Table of Contents
Advertisement
LOAD DISTRIBUTION
When loading the trailer it is important to distribute the load. To do this, check
that the weight on the trailer ball is not too small (risk of jackknifing), or too
heavy (restricted by the capacity of the hitch and the towing vehicle). This
weight must be approximately 10% of the load and must not exceed 15%.
CAUTION:
When towing a loaded trailer remember that braking distances are significantly
greater and that driving at higher speeds increases the risk of jackknifing.
GENERAL MAINTENANCE
• Grease the wheel bearings on an annual basis. For a safe and proper execution,
it is recommended that this operation be executed by a certified mechanic.
Otherwise, it is imperative that you consult and follow the axel manufacturer's
instructions and recommendations.
• Check that the coupler is correctly secured to the trailer ball and ensure they
are the same size.
• Check that the hub caps have not moved.
• Check that the safety chains are criss-crossed under the hitch extender and
securely fixed to the vehicle.
• Check that all the lights are working properly.
• Ensure that the tire pressure corresponds to the tire pressure recommended by
the manufacturer.
• After the initial use of the trailer, check that the wheel bolts are securely
tightened. Then, make sure you check the tightening of the wheel bolts on a
regular basis, ideally after each use.
• Observe the specified standard for the load capacity.
X
X
21
Advertisement
Table of Contents
