Chipset Configuration - Gigabyte G481-HA0 Service Manual

5-2-16 Chipset Configuration

Parameter
Restore on AC Power Loss
Skip Above 4G Decoding for VGA
P2P Bridge IO Size
Chassis Opened Warning
(Note) When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the
last power state.
BIOS Setup
Description
Defines the power state to resume to after a system shutdown that is
due to an interruption in AC power. When set to Last State, the system
will return to the active power state prior to shutdown. When set to
(Note)
Power Off, the system remains off after power shutdown.
Options available: Last State/Power Off/Power On. The default setting
depends on the BMC setting.
Enable/Disable 64bit capable devices to be decoded in Skip Above 4G
Address VGA Space.
Options available: Enabled/Disabled. Default setting is Disabled.
Sets P2P Bridge IO aligned to the size.
Options available: 0x100/0x150/0x1000. Default setting is 0x1000.
Enable/Disable the chassis intrusion alter function.
Options available: Enabled/Disabled/Clear. Default setting is
Disabled.
- 80 -