Table of Contents
Advertisement
2-2-13 Chipset Configuration
Parameter
Restore on AC Power Loss
Onboard LAN1/LAN2 Controller
(Note)
When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the
last power state.
Description
Defines the power state to resume to after a system shutdown that is
due to an interruption in AC power. When set to Last State, the system
will return to the active power state prior to shutdown. When set to
(Note)
Power Off, the system remains off after power shutdown.
Options available: Last State, Power Off, Power On, Unspecified. The
default setting depends on the BMC setting.
Enable/Disable onboard LAN controller.
Options available: Disabled, Enabled. Default setting is Enabled.
BIOS Setup
- 49 -
Advertisement
Table of Contents
