Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedures in
VGA Daughterboard
Removing the VGA daughterboard
Prerequisites
1. Follow the procedure in
2. Remove the
base cover
3. Remove the
battery
Steps
1. Disconnect the VGA daughterboard cable from the VGA daughterboard [1].
2. Remove the two (M2x3) screws that secure the VGA daughterboard to the palm rest and keyboard assembly [2].
3. Lift the VGA daughterboard away from the system [3].
After working inside your
computer.
before working inside your computer
Disassembly and reassembly
41