Table of Contents
Advertisement
2
Remove the
SD memory card
3
Remove the
base cover
4
Remove the
battery
5
Remove the
WLAN
6
Remove the
SSD
7
Remove the
hard drive assembly
8
Remove the
system fan
9
Remove the
heatsink
10
Remove the
display assembly
11
Remove the
display bezel
12
Remove the
camera
Steps
1
Remove the four (M2x2) screws that secure the display panel to the display back-cover and antenna assembly [1].
2
Lift the display panel and turn it over [2].
3
Peel the tape that secures the display cable to the back of the display panel [1].
4
Lift the latch and disconnect the display cable from the display-panel cable connector [2].
5
Lift the display panel away from the display back-cover and antenna assembly [3].
Removing and installing components
77
Advertisement
Table of Contents
