Next steps
1
Replace the
battery
2
Replace the
base cover
3
Replace the
SD memory card
4
Follow the procedure in
Hard drive
Removing the hard drive assembly
Prerequisites
1
Follow the procedure in
2
Remove the
SD memory card
3
Remove the
base cover
4
Remove the
battery
Steps
1
Lift the latch and disconnect the hard drive cable from the system board [1].
2
Remove the four (M2x3) screws that secure the hard drive assembly to the palm rest and keyboard assembly [2].
3
Lift the hard drive assembly along with its cable off the palm rest and keyboard assembly [3].
after working inside your computer
before working inside your computer
Removing and installing components
31