Removal Of Coils / Thermistors - Daikin 5MKS90E7V3B Service Manual

Si12-794

5. Removal of Coils / Thermistors

Procedure
Step
1. Remove the electronic
expansion valve coils.
1 Pull out the electronic
expansion valve coils.
2. Remove the thermistors.
Pull out the gas pipe
1
thermistors.
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Electronic
expansion
valve coil
Gas pipe thermistor
Removal of Coils / Thermistors
(R10415)
(R6446)
Gas pipe
thermistor
(R17412)
Place the thermistor so that
its edge comes up to the
edge of the fixture.
Be careful not to lose the
clips for the thermistors.
Clip
(R6448)
Points
27