Fortinet FortiGate FortiGate-5000 Quick Manual page 28

Inserting a FortiGate-5001FA2 module into a chassis
Inserting a FortiGate-5001FA2 module into a chassis
28
The FortiGate-5001FA2 module left extraction lever contacts to a hidden power
switch. The module must be fully installed in a chassis slot and this extraction
lever must be closed and locked for the FortiGate-5001FA2 module to receive
power and operate normally. If the FortiGate-5001FA2 module is not receiving
power, the IPM LED glows blue and all other LEDs remain off.
Figure 24: FortiGate-5001FA2 module mounting components
Alignment Pin
Mounting
Lock
Knot
Extraction
Lever
Table 8: FortiGate-5001FA2 normal operating LEDs
LED State
PWR Green
ACC Off (Or flashing red when the system accesses the FortiGate-5001FA2
flash disk.)
STA Green
IPM Off
FortiGate-5001FA2 security system
Closed
Alignment Pin
Mounting
Knot
Extraction
Lever
Open
Left Extraction
Lever
Lock
Switch Contact
FortiGate-5000 Series Quick Guide
01-00000-0294-20060315
Lock
Power
Switch