Step
Note:
5
(cont.)
• E-3 means the blood drop is too small, or incorrect test
procedure, or there may be a problem with the test strip .
• E-4 means the blood glucose level may be too high to be read
by the system or there may be a problem with the test strip .
See Troubleshooting section for more information .
6
After reviewing your result, remove and discard the used test
strip according to local regulations .
IMPORTANT: After performing a blood glucose test,
wash your hands with soap and water and thoroughly
dry them .
10:23pm
143
Example Screen Only
Your Blood Glucose Results
Blood glucose results are marked on the
results screen and in the Logbook with the
mg
symbol .
dL
Note: Contact your health care professional
if you have symptoms that do not match your
test results .
Action
68