To Add Firewall Addresses To A Virtual Domain; To Add Ip Pools To A Virtual Domain; To Add Virtual Ips To A Virtual Domain - Fortinet FortiGate FortiGate-3000 Administration Manual

Fortinet fortigate fortigate-3000: user guide
Hide thumbs Also See for FortiGate FortiGate-3000:
Table of Contents

Advertisement

System virtual domain
FortiGate-3000 Administration Guide
6
Select Create new to add firewall policies to the current virtual domain.
See
"Policy" on page
interfaces, VLAN subinterfaces, or zones added to the current virtual domain. The
firewall policies that you add are only visible when you are viewing the current virtual
domain. Network traffic accepted by the interfaces and VLAN subinterfaces added to
this virtual domain is controlled by the firewall policies added to this virtual domain

To add firewall addresses to a virtual domain

The following procedure applies to NAT/Route and Transparent mode.
1
Go to System > Virtual domain > Virtual domains.
2
Select Change following the current virtual domain name above the table.
3
Choose the virtual domain for which to configure firewall addresses.
4
Select OK.
5
Go to Firewall > Address.
6
Add new firewall addresses, address ranges, and address groups to the current virtual
domain. See
"Address" on page

To add IP pools to a virtual domain

The following procedure applies to NAT/Route mode.
1
Go to System > Virtual domain > Virtual domains.
2
Select Change following the current virtual domain name above the table.
3
Choose the virtual domain for which to configure firewall IP pools.
4
Select OK.
5
Go to Firewall > IP Pool.
6
Add new IP pools as required for the current virtual domain. See
page
226.

To add Virtual IPs to a virtual domain

The following procedure applies to NAT/Route mode.
1
Go to System > Virtual domain > Virtual domains.
2
Select Change following the current virtual domain name above the table.
3
Choose the virtual domain for which to configure virtual IPs.
4
Select OK.
5
Go to Firewall > Virtual IP.
6
Add new virtual IPs as required for the current virtual domain. See
page
222.
198. You can only add firewall policies for the physical
206.
01-28006-0010-20041105
Configuring virtual domains
"IP pool" on
"Virtual IP" on
147

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents