Panasonic CS-Z25UB4EAW Service Manual page 89

5 Function & Options list:
Note: The functions described in the table may not be applicable to the model and may subject to change without
further notice.
No
1 Remote control number selection
2 Solar radiation sensitivity level adjustment
[iAUTO-X/iAUTO/iCOMF, Cool & Dry] mode set temperature [Low2]
3
selection
[iAUTO-X/iAUTO/iCOMF, Cool & Dry] mode set temperature [High2]
4
selection
5 Heat mode set temperature Low1 selection
Zone 1
6 Heat mode set temperature High1 selection
7 Filter cleaning disable/enable selection
8 nanoe-G default ON disable/enable selection
9 Dust sensor monitoring & LED disable/enable selection
10 Auto restart disable/enable selection
11 Dust sensor sensitivity level adjustment
12 ~ 49 Reserve
50 ECO demo ON
51 Light sensor check
52 nanoe-G / ECO sensor check
53 DOA check
54 Odor cut control selection [Enable (01) / Disable (00)]
55 Frequency tolerance selection [±3Hz (03) / ±7Hz (07)]
Fixed fan speed selection during heat mode compressor OFF [Enable
56
(01) / Disable (00)]
57 nanoe check
58 Heat mode thermo shift adjustment
59 Others (Cool & Dry) mode thermo shift adjustment
Deice start determination judgment temperature switching [Yes (01) /
60
No (00)]
61 Cool mode disable selection [Yes (01) / No (00)]
Zone 2
62 Heat mode disable selection [Yes (01) / No (00)]
63 Base pan heater selection [Base pan A (A) / Base pan B (b)]
Disable fan speed reduction during cool mode thermo-Off [Yes (01) /
64
No (00)]
65 LED smart OFF selection
66 nanoe-g ON/OFF duration selection
67 Operation OFF deice function selection
68 Compressor frequency change speed selection
69 ~ 99 Reserve
Function
Name
89
Options
A, B, C, D
1, 2, 3, 4, 5
16°C ~ [High2]
[Low2] ~ 30°C
16°C ~ [High1]
[Low1] ~ 30°C
00 / 01
00 / 01
00 / 01
00 / 01
1, 2, 3
None (No display)
None (No display)
None (No display)
None (No display)
00 / 01
03 / 07
00/01
None (No display)
-3°C ~ 3°C
-3°C ~ 3°C
00/01
00/01
00/01
A / b
00/01
00 – Disable /
01 – Enable
01 – Pattern 1 /
02 – Pattern 2 /
03 – Pattern 3 /
04 – Pattern 4
00 – Disable /
01 – Enable
01 – Pattern 1 /
02 – Pattern 2 /
03 – Pattern 3
Remark