Epson XP-6100 User Manual page 269

LCD screen message Condition/solution
Print Head Adjustment If print quality has not improved after running a nozzle check and head
Canceled. There is a cleaning 3 times, wait for at least 6 hours without printing (we recommend
problem with the print turning off the product), and then run the nozzle check again and repeat the
head. Contact Epson head cleaning if necessary. If print quality has still not improved, contact
Support. Epson for support.
Install the Epson Event Make sure Epson Event Manager is installed on your computer.
Manager software in the
computer to use this
feature. See your
documentation for more
details.
Check the followings Make sure your product and computer are properly connected and all
when the computer is necessary software is installed. Make sure the computer is turned on. You
not found. may need to adjust the settings in your firewall or security software.
- Connection between
the printer and the
computer (USB or
network)
- Installation of
necessary software
- Computer powered on
- Settings for firewall and
security software
- Search again
See your documentation
for more details.
269