FoodSaver V1050 User Manual page 20

Guide.1050_v5.1 12/31/03 4:24 PM Page 36
T H E F O O D S AV E R U S E R M A N U A L
Troubleshooting
The Bag Melts:
The Sealing Strip may have become too hot. Always wait at least
1
20 seconds for the appliance to cool down before vacuuming
and/or sealing another bag.
The Bag Will Not Seal:
Wait 20 minutes to allow the appliance to cool off, then try using
1
it again. The appliance will shut off automatically if it becomes
too hot. To help prevent the appliance from becoming too hot:
Wait at least 20 seconds for the appliance to cool down after
a.
vacuum packaging and/or sealing before attempting to vacuum
and/or seal another bag.
Keep the lid open before vacuuming and/or sealing another bag.
b.
36
T H E F O O D S AV E R U S E R M A N U A L
The Mason Jar Will Not Vacuum:
Make sure the Jar Sealer is centered and pressed firmly over the
1
lid on the Mason jar.
Make sure the rubber gasket on the Jar Sealer lid is free from
2
food materials, crumbs, etc.
Make sure the rim of the Mason jar does not have any cracks or
3
scratches. Any gaps can prevent a vacuum from forming.
Make sure you aren't filling the Mason jar too full prior to
4
vacuum packaging. Always leave at least one inch (1")
between the contents and the lid.
Make sure the metal lid of the Mason jar is not bent.
5
Make sure the Accessory Hose is securely in the Accessory Port on
6
the appliance and on the Jar Sealer.
37