Table of Contents
Advertisement
Gigaset E45 / USA EN / A31008-M1751-R101-2-6Z19 / start_guide_time.fm / 30.3.06
Using a handset as a room monitor
Last number redial list
The last number redial list contains the ten
numbers last dialed with the handset
(max. 32 numbers). If one of the numbers
is in the directory, then the corresponding
name will be displayed.
Manual last number redial
c
Press the key briefly.
s
Select entry.
c
Press the talk key again. The
number is dialed.
When a name is displayed, you can display
the corresponding phone number by
pressing the display key
Managing entries in the last number
redial list
c
Press the key briefly.
s
Select entry.
Open the menu.
Options
The following functions can be selected
with q:
(as in the directory,
Display Number
page 12)
Copy to Directory
Copy an entry to the directory
(page 12).
(as in the directory, page 12)
Delete Entry
(as in the directory, page 12)
Delete List
Opening lists with the
message key
The message key will illuminate after each
missed call whether the caller left a voice
mail message or not. An advisory tone
sounds as soon as a new entry appears on
a list. The f key flashes (it will go off
when the key is pressed). In idle status,
the display shows an icon for the new
message.
14
.
§View§
If you press the f key, you access the
lists which contain new messages.
Using a handset as a room
monitor
If the room monitor is activated, a previ-
ously stored destination number is called
as soon as a set noise level is reached.
You can store an internal or external num-
ber in your handset as the destination
number.
The room monitor call to an external num-
ber stops after approx. 90 seconds. The
room monitor call to an internal number
(handset) stops after approx. 3 minutes
(depending on the base station). While
the room monitor is activated, all keys are
locked except the end call key. The hand-
set's speaker is muted.
When the room monitor is activated,
incoming calls to the handset are indi-
cated without a ringtone and are only
shown on the screen. The display and
keypad are not illuminated and advisory
tones are also turned off.
If you accept an incoming call, the room
monitor mode is suspended for the dura-
tion of the call, but the function remains
activated.
If you switch off the handset, the room
monitor mode is deactivated. You will
need to reactivate the function after
switching on the handset again.
Advertisement
Table of Contents
