Table of Contents
Advertisement
Gigaset E45 / USA EN / A31008-M1751-R101-2-6Z19 / start_guide_time.fm / 30.3.06
Returning to idle status
You can go back to idle status from any-
where in the menu as follows:
¤
Press and hold the end call key a.
Or:
¤
Do not press any key: after 2 minutes
the display will automatically revert to
idle status.
Changes that you have not confirmed or
saved by pressing
Save Entry
will be lost.
§OK§
An example of the display in idle status is
shown on page 2.
Menu guidance
Your telephone's functions are accessed
using a menu that has a number of levels.
Main menu (first menu level)
¤
Press v with the handset in idle status
to open the main menu.
The main menu functions are shown in
the display as a list with icon and name.
Accessing a function, i.e. opening the cor-
responding submenu (next menu level):
¤
Navigate to the function using the con-
trol key q. Press the display key
Submenus
The functions in the submenus are dis-
played as lists.
To access a function:
¤
Scroll to the function with the control
key q and press
Or:
¤
Enter the corresponding digit combina-
tion.
A short press on the end call key a
returns you to the previous menu level /
cancels the operation.
,
,
,
or
§OK§
§Yes§
§Save§
§Send§
.
§OK§
.
§OK§
Using the directory and lists
Correcting incorrect entries
You can correct incorrect characters in the
text by navigating to the incorrect input
using the control key. You can then:
X
u
press
to delete the character to the
left of the cursor,
u
insert characters to the left of the cur-
sor,
u
overwrite the (flashing) character
when entering the time and date etc.
u
You will find examples of symbols
used, menu entries and multiple line
input in the appendix to this user guide,
page 26.
Using the directory and lists
You can store a maximum of 150 entries in
the directory and call-by-call list (the
actual number depends on the size of the
individual entries).
You create the directory and call-by-call
list for your own individual handset. You
can, however, send lists/entries to other
handsets or the base station (page 13).
Directory and call-by-call list
In the directory, you can store numbers
and names associated with them.
¤
With the handset in idle status, open
the directory by pressing the s key.
The call-by-call list is used to store
the access codes for network providers
(so-called "call-by-call numbers").
¤
Open the call-by-call list in idle status
by pressing the C key.
Length of entries
Number:
max. 32 digits
Name:
max. 16 characters
Note:
For quick access to a number from the direc-
tory or the call-by-call list (quick dial), you can
assign the number to a key.
11
Advertisement
Table of Contents
