Cisco AIR-AP1251AG-A-k9 Hardware Installation Manual page 42

Mounting Above a Suspended Ceiling
The bracket mounting clip requires the use of two mounting clip holes on the mounting plate (see
Figure
Figure 2-5
1 Bracket mounting clip holes
Follow these steps to mount the access point above a suspended ceiling.
Insert the bracket mounting clip's tab into the large hole on the access point mounting plate.
Step 1
Place the clip over the T-bar box hanger and secure it to the access point mounting plate (see
Step 2
with the 1/4-20 fastener (supplied with the T-bar hanger).
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
2-12
C I S C O C O N F I D E N T I A L - D r a f t A 1
2-5).
Mounting Clip Holes
Chapter 2
1
Installing the Access Point
Figure 2-6)
OL-8247-02