Technical Specifications; Homologations; Safety, Performance & Quality; Certifications - Potterton Assure System Series Installation And Service Manual

3 Technical specifications

3 Technical specifications
3.1

Homologations

Tab.1

Certifications

CE certificate number
NOx class
Boiler type
Tab.2 Gas category, type and supply pressure

Gas category

I
2H
12
3.1.1
This boiler has been assessed by an appropriate Notified Body and shown
to meet the requirements of all Directives and Regulations as applicable.
These Directives and Regulations lay down requirements for the safety
and efficiency of the appliance, together with its design, construction and
use of materials. They also require the production process to be covered
by an approved and monitored system of quality assurance.
3.1.2
3.1.3
Gas type
G20
3.1.4
Codes of Practice — refer to the most recent version
Tab.3
Standard
BS 6891
BS 5546
BS EN
12828
BS EN
12831
BS EN
14336
BS 6798
BS 5440
Part 1
BS 5440
Part 2
BS 7074
BS 7593
BS 4814
IGE/UP/
7/1998
Safety, Performance & Quality
Certifications
0085CS0215
6
C , C
13 33
Gas category
Supply pressure (mbar)
20

Standards

In GB the following Codes of Practice apply:
Scope
Gas Installation.
Installation of hot water supplies for domestic purposes.
Heating systems in buildings.
Heating systems in buildings — Calculation of load.
Installation & commissioning of water based heating sys­
tems.
Installation of gas fired hot water boilers.
Flues.
Ventilation.
Expansion vessels and ancillary equipment for sealed wa­
ter systems.
Treatment of water in domestic hot water central heating
systems.
Specification for Expansion Vessels using an internal dia­
phragm, for sealed hot water systems.
Guide for gas installations in timber framed housing.