Predefined Setpoint - Siemens RWF55.5 User Manual


Setpoint
Shifting
changeover
SP1
Analog via InP2
SP2
Analog via InP2
SP1
External setpoint
via InP2
Setpoint SP1 analog via
InP2,
no binary shifting
Setpoint SP1 analog via
InP2, binary shifting
about setpoint dSP
External setpoint via
InP2,
no binary shifting
External setpoint via
InP2,
binary shifting about
setpoint dSP
28/93
Building Technologies Division
Infrastructure & Cities Sector

5.4 Predefined setpoint

The setpoints (SP1, SP2 or dSP) are predefined within the selected setpoint limits via the
buttons or the ACS411 software.
It is possible to shift the setpoint using either an analog or a binary signal, to change it
via an external contact, or to influence it using a weather-compensated method.
Reference!
See chapter 8.8 Binary functions binF.
Binary input
D1
Open
Closed
Open
Closed
Open
Closed
Open
Closed
User Manual RWF55...
5 Operating modes
Information
Reference!
See chapter 5.4.1 Setpoint changeover

SP1/SP2, or shifting analog via InP2
Reference!
See chapter 5.4.2 Setpoint changeover

SP1 / external setpoint via InP2
Reference!
See chapter 5.4.3 Setpoint shifting SP1

analog via InP2 / binary via dSP
Reference!
See chapter 5.4.4 External setpoint,

setpoint shifting binary via dSP
CC1U7867en
05.11.2013