Xstatus Network 1 Cdp Primarymgmtaddress; Xstatus Network 1 Cdp Sysname; Xstatus Network 1 Cdp Sysobjectid; Xstatus Network 1 Cdp Version - Cisco TelePresence SX20 Codec Reference Manual

Application programming interface (api)
Hide thumbs Also See for TelePresence SX20 Codec:
Table of Contents

Advertisement

Cisco TelePresence SX20 Codec
Introduction

xStatus Network 1 CDP PrimaryMgmtAddress

Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end

xStatus Network 1 CDP SysName

Returns the SysName as configured in the switch the endpoint is connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end

xStatus Network 1 CDP SysObjectID

Returns the SysObjectID as configured in the switch the endpoint is connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API
xConfiguration
xCommand

xStatus Network 1 CDP Version

Returns information about the software release version the switch is running.
Value space of the result returned:
String
Example:
xStatus Network 1 CDP Version
*s Network 1 CDP Version: "Cisco IOS Software, C3560CX Software (C3560CX-
UNIVERSALK9-M), Version 15.2(3)E, RELEASE SOFTWARE (fc4)*Technical Support:
http://www.cisco.com/techsupport*Copyright (c) 1986-2014 by Cisco Systems,
Inc.*Compiled Sun 07-Dec-14 13:15 by prod _ rel _ team"
** end

xStatus Network 1 CDP VoIPApplianceVlanID

Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information
see documentation of the IEEE 802.1Q protocol.
Value space of the result returned:
String
Example:
xStatus Network CDP VoIPApplianceVlanID
*s Network 1 CDP VoIPApplianceVlanID: "300"
** end

xStatus Network 1 CDP VTPMgmtDomain

Returns the switch's configured VTP management domain name-string.
Value space of the result returned:
String
Example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end
150
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents