Janome 4300QDC Instruction Book page 40

v
y
i
o
i
!2
!2
b
v Lower the presser foot and pull the buttonhole lever
NOTE:
The reference lines on the buttonhole foot can be
!0
used as a positioning guide.
Make sure there is no gap between the slider and
u
stopper, otherwise the buttonhole will be out of
position or there will be a sewing gap.
!1
i
i
!2
b Start sewing while pulling the needle thread lightly to
NOTE:
If you start sewing without pulling down the buttonhole
lever, the LCD display will show a warning and
the machine will stop after a few stitches. Pull the
buttonhole lever down and start sewing.
38
down as far as it will go.
y
Buttonhole lever
u
No gap
i
Starting point
o
Reference lines
!0 Slider
!1 Stopper
!2 Sewing gap
the left. After sewing a few stitches, free the thread
and continue sewing.